DES is a leading company in supplying rolling stock, heavy industry, military and fire protective equipments. |
|
|
|
HOME |
Machine Tools
|
DES-THM001 |
|
Description The series of machine is used for machining three-thread-holes of axle ends, for locomotive carriages and wagons(including with wheel set and without wheel set).
1. Workpiece can be clamped and positioned by craning or rolling-through,it can be for single machine also production line.
2. The machine adopts left and right symmetric arrangement, the three thread holes are arranged concentrate at three positions i.e :hole drilling, trepanning, chamfering and tapping, the three positions can be moved in horizontal to change the positions realizing by servo motor to drive ballscrew with high reliability and positioning accuracy.
3. From positioning and clamping, the workpiece can be fully automatic circulating during machining controlled by 802D system. That is to be machined for two faces in a same step. also it can be single face machined.
4. Longitudinal feed of the power head is realized by servo motor to drive ballscrew,main, its main movement motorand is done by converter. Thus the feed per revolution is the same as taper.Preventing from wearing when profiling construction is used. At the same time it is no necessary to move often limitation switch when axles with different size being machined, hole depth is controlled with half closed loop with high accuracy.
5.The machine is cooled with cooling oil, coolant liquid can be used cycling, the protection device is good looking, practical, reliable. Moreover drilling and tapping spindles are equipped with internal cooling,The left and right centering device is equipped with chip-blowing unit, preventing from damaging of thread hole and tool . Main Specification
Main specification |
Unit\Model |
DES-THM001 |
Max. length of workpiece |
mm |
2600(for motor transmitting shaft) |
Range of axle length |
mm |
2010~2160 |
Dia of ring for three thread holes |
|
φ85(change main bit while using shaft RB2.RE4) φ85(when RB2,RE4,main power head) |
Tapping dia |
|
M22×2.5 |
Range of spindle speeds for drilling and trepanning |
r/min |
30~3.5 |
Range of spindle speeds for tapping |
r/min |
20~120 |
Longitudinal feed for transverse slide |
mm |
35~125 |
Transverse moving speeds for transverse slide |
mm |
1000~2500 |
Motor Power of left and right spindle box drilling |
kW |
Y series motor 132S1-B5-5.5 |
Torque |
N.m |
17.5 |
Speeds |
r/min |
3000 |
Motor Power of left and right spindle box tapping |
kW |
Y series motor 112-B5-5.5 |
Torque |
N.m |
12.5 |
Speeds |
r/min |
3000 |
Longitudinal servo motor for left and right transverse slide |
|
1FK6063 |
Torque |
N.m |
6 |
Speeds |
r/min |
3000 |
Transverse servo motor for left and right transverse slide |
|
1FK6063 |
Torque |
N.m |
6 |
Speeds |
r/min |
3000 |
Overall dimensions(L×W×H) |
mm |
6750×2100×1370 | |
|
|
|
|